Skip to main content

GreenPAK

Programmable Mixed-signal Matrix

GreenPAK™ is a broad family of cost effective NVM programmable devices that enable innovators to integrate many system functions into a single custom circuit, and in the process minimize component count, board space, and power consumption. Using Dialog's GreenPAK Designer Software and GreenPAK Development Kit, designers can create and program your perfect custom circuit in minutes.

GreenPAK Banner map

Benefits

Benefits Over Discrete Design

Smaller PCB footprint– Plastic packages as small as 1.0 x 1.2 mm.

Fewer Components/Lower Cost– A typical GreenPAK implementation removes from ten to thirty components per instance.

Higher Reliability– Fewer PCB interconnects increases reliability.

Faster Design– Develop and program devices in minutes at your desk. Quickly respond to changing design requirements and increase productivity at the design and prototype verification stages.

Lower Power– Save power by removing discrete resistors in voltage dividers, pull ups, pull downs, etc. and replacing with low-power, integrated components. Further reduce power consumption using the sleep function.

Design Security– Makes reverse engineering substantially more difficult by disabling the read-back of NVM configuration, obscuring design details.

Tested Solutions– Every GreenPAK IC is tested, while a discrete circuit is not tested prior to the final board level test.

雷竞技安卓下载

GreenPAK Is Ideal For

Functional replacement of popular mixed-signal standard products, often in combination.

Providing reliable hardware safety and reset functions for software coded devices, such as SoCs and microcontrollers.

Adding different features.

Overcoming last minute design challenges/issues.

See the full library of application notes

Unique Feature Subsets

Dual Supply GreenPAK
Interface two independent voltage domains flexibly

GreenPAK with Power Switches
Configure the GreenPAK, while at the same time control high drive current power switches

GreenPAK with Asynchronous State Machine
Develop your own custom state machine designs

GreenPAK with Low Drop Out Regulators
Discover the concept of "Flexible Power Islands"

GreenPAK with In-System Programmability
Easily modify the configuration or add functionality to the devices by programming the Non-Volatile Memory (NVM)

High-Voltage GreenPAKs
Take best advantage of the combined mixed-signal logic and high-voltage H-bridge functionality

Automotive GreenPAKs
Integrate many system functions into a single AEC-Q100 qualified IC

Analog GreenPAKs
Create your own unique analog circuits combined with GreenPAK configurable logic

Development boards

GreenPAK DIP Development Board
Perfect for breadboarding and fast prototypes.

GreenPAK Advanced Development Board
Program custom samples in minutes using any GreenPAK device.

GreenPAK Pro Development Board
Program custom samples in minutes using select GreenPAK device.

Events

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
PN Special Feature GPIO Nominal VDD
(V)
ACMP DCMP/PWM Max. CNT/DLY Max. LUTs Max. DFF Pipe
Delay
Progr. DLY OSC Com. Interface Package Size (mm) Socket Documents
SLG46127
SLG46127MTR
2x P-FET 6 1.8 - 5.0 2 - 4 10 4 8-stage 1 RC OSC - 1.6 x 2.0 mm MSTQFN-16 (#1) Documentation
SLG46580 ASMLDO 9 2.5 - 5.0 4 - 5 16 9 16-stage 1 Conf. OSCLP OSC I²C 2.0 x 3.0 mm STQFN-20 (#3) Documentation
SLG46582 ASMLDO 9 2.5 - 5.0 4 - 5 16 9 16-stage 1 Conf. OSCLP OSC I²C 2.0 x 3.0 mm STQFN-20 (#3) Documentation
SLG46583 ASMLDO 9 2.5 - 5.0 4 - 5 16 9 16-stage 1 Conf. OSCLP OSC I²C 2.0 x 3.0 mm STQFN-20 (#3) Documentation
SLG46585 ASMLDODCDC 9 2.5 - 5.0 4 - 5 16 9 16-stage 1 Conf. OSCLP OSC I²C 3.0 x 3.0 mm MSTQFN-29 (#1) Documentation
SLG46533
SLG46533MTR
- 18 1.8 - 5.0 4 - 7 25 15 16-stage 1 Conf. OSCRing OSCCrystal OSC I²C 2.0 x 2.2 mm
2.0 x 3.0 mm
MSTQFN-22 (#1)STQFN-20 (#1) Documentation
SLG46538 ASMDual Supply 17 1.8 - 5.01.8 - VDD1 4 - 7 17 8 16-stage 1 Conf. OSCRC OSCCrystal OSC I²C 2.0 x 3.0 mm
2.0 x 2.2 mm
STQFN-20 (#2)MSTQFN-22 (#2) Documentation
SLG46538-A ASMDual Supply 17 1.8 - 5.01.8 - VDD1 4 - 7 17 8 16-stage 1 Conf. OSCRC OSCCrystal OSC I²C 3.5 x 3.5 mm TQFN-20 Documentation
SLG46537 ASM 18 1.8 - 5.0 4 - 7 17 8 16-stage 1 Conf. OSCRC OSCCrystal OSC I²C 2.0 x 3.0 mm
2.0 x 2.2 mm
STQFN-20 (#1)MSTQFN-22 (#1) Documentation
SLG46536 - 12 1.8 - 5.0 3 - 7 25 15 16-stage 1 Conf. OSCRing OSCCrystal OSC I²C 2.0 x 2.2 mm STQFN-14 (#2) Documentation
SLG46535 ASMDual Supply 11 1.8 - 5.01.8 - VDD1 3 - 7 17 8 16-stage 1 Conf. OSCRing OSCCrystal OSC I²C 2.0 x 2.2 mm STQFN-14 (#3) Documentation
SLG46534 ASM 12 1.8 - 5.0 3 - 7 17 8 16-stage 1 Conf. OSCRC OSCCrystal OSC I²C 2.0 x 2.2 mm STQFN-14 (#2) Documentation
SLG46170 - 12 1.8 - 5.0 - - 8 17 6 16-stage 1 RC OSC - 2.0 x 2.2 mm STQFN-14 (#2) Documentation
SLG46169 - 12 1.8 - 5.0 2 - 7 18 6 16-stage 1 RC OSC - 2.0 x 2.2 mm STQFN-14 (#2) Documentation
SLG46108 - 6 1.8 - 5.0 - - 4 10 4 8-stage 1 RC OSC - 1.0 x 1.2 mm STQFN-8 (#1) Documentation
SLG46121 Dual Supply 9 1.8 - 5.01.8 - VDD1 2 - 4 16 8 8-stage 1 RC OSC - 1.6 x 1.6 mm STQFN-12 (#2) Documentation
SLG46621 Dual Supply8-bit ADC 17 1.8 - 5.01.8 - VDD1 6 3/3 10 26 12 16-stage 2 2 LF OSCRing OSCRC OSC SPI 2.0 x 3.0 mm STQFN-20 (#2) Documentation
SLG46620 8-bit ADC 18 1.8 - 5.0 6 3/3 10 26 12 16-stage 2 2 LF OSCRing OSCRC OSC SPI 2.0 x 3.0 mm
6.5 x 6.4 mm
STQFN-20 (#1)TSSOP-20 (#1) Documentation
SLG46620-A 8-bit ADC 18 1.8 - 3.3 6 3/3 10 26 12 16-stage 2 2 LF OSCRing OSCRC OSC SPI 6.5 x 6.4 mm TSSOP-20 (#1) Documentation
SLG46117 1x P-FET 7 1.8 - 5.0 2 - 4 10 4 8-stage 1 RC OSC - 1.6 x 2.5 mm STQFN-14 (#1) Documentation
SLG46116 1x P-FET 7 1.8 - 5.0 2 - 4 10 4 8-stage 1 RC OSC - 1.6 x 2.5 mm STQFN-14 (#1) Documentation
SLG46140 8-bit ADC 12 1.8 - 5.0 2 3/3 4 16 6 16-stage 1 LF OSCRing OSCRC OSC SPI 1.6 x 2.0 mm STQFN-14 (#1) Documentation
SLG46120 - 10 1.8 - 5.0 2 - 4 16 8 8-stage 1 RC OSC - 1.6 x 1.6 mm
2.0 x 2.0 mm
STQFN-12 (#1) Documentation
SLG46110 - 8 1.8 - 5.0 2 - 4 10 4 8-stage 1 RC OSC - 1.6 x 1.6 mm STQFN-12 (#1) Documentation
SLG46722 - 18 1.8 - 5.0 - - 8 17 6 16-stage 1 RC OSC - 2.0 x 3.0 mm STQFN-20 (#1) Documentation
SLG46721 - 18 1.8 - 5.0 4 - 7 18 6 16-stage 1 RC OSC - 2.0 x 3.0 mm STQFN-20 (#1) Documentation
SLG46824 In-System ProgrammabilityDual Supply 17 2.5 - 5.01.8 - VDD1 2 - 8 19 17 16-stage 1 RC OSCLP OSCRing OSC I²C 2.0 x 3.0 mm
6.5 x 6.4 mm
STQFN-20 (# 4)TSSOP-20 (#2) Documentation
SLG46826 In-System ProgrammabilityDual Supply 17 2.5 - 5.01.8 - VDD1 4 - 8 19 17 16-stage 1 RC OSCLP OSCRing OSC I²C 2.0 x 3.0 mm
6.5 x 6.4 mm
STQFN-20 (# 4)TSSOP-20 (#2) Documentation
SLG46827-A In-System DebugDual Supply 17 2.5 - 5.01.8 - VDD1 4 - 8 19 17 16-stage 1 RC OSCLP OSCRing OSC I²C 6.5 x 6.4 mm TSSOP-20 (#2) Documentation
SLG46880 ASMDual Supply 28 2.5 - 5.02.5 - VDD1 4 - 5 12 5 16-stage 1 RC OSCLP OSCRing OSCCrystal OSC I²C 4.0 x 4.0 mm STQFN-32 (#1) Documentation
SLG46881 ASMDual Supply 28 2.5 - 5.01.0 - 1.8 4 - 5 12 5 16-stage 1 RC OSCLP OSCRing OSCCrystal OSC I²C 4.0 x 4.0 mm STQFN-32 (#1) Documentation
SLG46517 ASM2x P-FET 16 1.8 - 5.0 4 - 7 17 8 16-stage 1 RC OSCRing OSCCrystal OSC I²C 2.0 x 3.0 mm MSTQFN-28 (#1) Documentation
SLG46855 - 12 2.5 - 5.0 4 - 8 23 21 16-stage 1 RC OSCLP OSCRing OSC I²C 1.6 x 2.0 mm STQFN-14 (#1) Documentation
SLG46855-A - 12 2.5 - 5.0 4 - 8 23 21 16-stage 1 RC OSCLP OSCRing OSC I²C 3.0 x 3.0 mm FCQFN-14 (#1) Documentation
SLG46867 2x P-FET 10 2.5 - 5.0 4 - 8 23 21 16-stage 1 RC OSCLP OSCRing OSC I²C 1.6 x 3.0 mm MSTQFN-20 (#1) Documentation
SLG47105 Dual Supply4 Half- / 2 Full- bridgesI/V Regulation 84 x HV 2.5 - 5.03.3 - 12.0 2 0/2 5 17 15 16-stage 1 LP OSCRing OSC I²C 2.0 x 3.0 mm STQFN-20 (#5) Documentation
SLG47004 Op AmpDigital RheostatAnalog SwitchAuto TrimIn-System Programmability 8 2.5 - 5.0 3 0/0 7 20 18 16-stage 1 RC OSCLP OSCRing OSC I²C 3.0 x 3.0 mm STQFN-24 (#1) Documentation
SLG88103 Op Amp 0 1.8 - 5.0 0 0/0 0 0 0 - 0 - - 2.0 x 2.0 mm STDFN-10 Documentation
SLG88104 Op Amp 0 1.8 - 5.0 0 0/0 0 0 0 - 0 - - 2.0 x 3.5毫米 STQFN-20 Documentation
SLG46811 92 x 8 bit pattern generator 10 2.5 - 5.0 1 (4) 0/0 6 18 17 4 x 8-bit Sh Reg 1 Ring OSC
LP OSC
I²C 1.6 x 1.6 mm STQFN-12 (#1) Documentation

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
GreenPAK Designer
Name Date Version
GreenPAK Designer software for Windows, macOS or Linux(7.58 KB)
Brochures
Name Date Version
Computing and storage solutions(9.78 MB) 01/01/2020 1.0
GreenPAK™ Brochure(3.4 MB) 01/01/2020 1.0
User guides and manuals
Name Date Version
GreenPAK Cookbook(9.21 MB) 01/12/2020 1.0

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
Video thumbnail, click to open and play

GreenPAK Configurable Mixed-signal IC Introduction

Video thumbnail, click to open and play

GreenPAK Designer Software

Video thumbnail, click to open and play

GreenPAK Development Platform

Video thumbnail, click to open and play

Choosing the Right GreenPAK

View the full list of the GreenPAK videos in ourTraining Video Library.

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters

Our Partner Network was created to provide consulting services and application support to our clients. Our partners have demonstrated competence in Configurable Mixed-signal products and may help to supplement your own engineering resources.

Company Name Description Country Address
Whizz Systems Please contact Whizz Systems for support regarding Whizz Systems reference designs and evaluation boards. USA
3240 Scott Blvd., Santa Clara, 95054, California
Black Oak Engineering, LLC Black Oak Engineering does custom design, rapid prototyping and manufacture. We specialize in analog, communications, control, embedded, instrumentation and sensors in a wide variety of applications. USA
#684, 150 Veterans Mem Hwy, Commack,11725, New York
John Battle and Associates Electronic Circuit Design including analog, rf, microwave and digital. Emphasis on communication circuits and systems. Microprocessor and FPGA programming and PC Board design using EAGLE. USA
2620 Dove Creek Lane, Suite B, Pasadena, 91107, California
Shadwell Technical Services Consulting in applied physics and electronics. We specialize in solving the most difficult technical problems, from sewerage treatment to aerospace. Special areas of expertise include medical, robotic, artificial intelligence, and a wide range of physics and chemistry problems. Analog and digital design, construction of functional prototypes built to scale, embedded systems, and software. USA
3308 Queen Palm Drive, Jacksonville, 32250-2328, Florida
Resolution Engineering, Inc. Resolution Engineering provides analog/digital, RF, and embedded systems design. Additionally, we offer firmware development, PCB layout and prototyping, and antenna design. Our specialty is the design of devices for wireless control, sensing, and data connectivity. We can assist with small portions of a design program, or provide full turnkey system development. Our experienced engineers can handle projects of virtually any scope or size. USA
1402 Heggen St, Hudson, 54016, Wisconsin
Pringle Electronics Group Pringle Electronics Group primarily serves the Embedded Systems related industries providing hardware, software, FPGA and FPGA-SoC design and consulting services. We also provide product design services at the architectural, schematic and PCB design level for all types of systems. USA
5530 Sierra Springs Drive, Pollock Pines, 95726, California
SEG13, L.L.C. Embedded system design services. USA
13 South Galaxy Drive, Chandler, 85226, Arizona
先进Bitnology Expertise in product development, Embedded Systems, Ultra-Low Power, Firmware, Software, Device Drivers. USA
469 Cherry Ave, San Bruno, 94066, California
Clifford Consulting, Inc. Embedded design and development group with a wide range of experience. We can assist you in both software and hardware including e.g., digital signal processing, communications, industrial sensors, and medical instruments. Army SBIR Phase II Quality Award; NBS Outstanding Service Award; PSoC Analog Design Contest Winner. USA
636 Great Road, Stow, 1775, Massachusetts
弗雷泽技术 咨询就是ces in analog and digital systems. Design reviews, cost reductions, printed circuit layout and magnetics. Specializing in all aspects of switching power supplies. Commercial, Industrial and Military USA
1600 Bengal Dr., Round Rock, 78664, Texas
Ouellette Consulting 咨询就是ces for analog and digital system design, simulation, fabrication and debugging including embedded, FPGA, mixed-signal PCB, and full-custom mixed-signal ICs. We deliver innovative, robust electronic designs from concept through prototype to production for industrial, commercial, and military applications. We rapidly develop innovative solutions with the highest performance and reliability while avoiding pitfalls. USA
43A Groton Harvard Rd., Ayer, 1432, Massachusetts
Stratford Digital Stratford Digital has specialized in embedded electronic design since 2004. We offer project-based design services including both hardware and firmware design. These services include: embedded system design, schematic capture, PCB layout, programmable logic, power supply design, and much, much more. We will find the best technology to fit your needs. Canada
4787 Line 42 Perth E., RR1, Sebringville, N0K 1X0, Ontario
ADOM Ingenieria We specialize in professional design, development, support and consulting in analog and digital electronic requirements. Argentina
Calle 49 Nro 873 5 A, La Plata, Prov. Buenos Aires
Refecor Refecor is an electronics design and products design company. Refecor has deep knowledge in wireless technologies and skills in production, so the customer can get everything from a prototype phase to a product to the market from Refecor. Finland
Isokatu 8A1, Oulu, 90100
Axis3000 Electronic Axis3000 provides hardware and embedded software consulting and engineering services for industrial applications, with support on all levels from architecture to schematic entry, board-level layout and prototyping up to logic design based on field programmable devices. Germany
Kurt-Schumacher Strasse 1, 85221, Dachau
EDAXI UG (haftungsbeschraenkt) Consulting and engineering for Embedded Systems based on microcontrollers, SoC and other programmable logic. Germany
Maria-Merian-Str. 6, Monheim am Rhein, 40789
Microlab Microlab can offer design and consulting services on a broad spectrum of electronic field, both hardware and software. Main advantages and benefits stand in rapid and high quality project development due to experience and knowledge acquired during more than 30 years of activity. Microlab is design partner of various electronic device manufacturers but we can even design using any device our Customer could prefer for any reason such as historical device choice, stock availability, etc.. Italy
Via Castiglione dOrcia, 28, Roma, 149
Francesco Not Francesco Not is an Italian consultant in the Embedded Electronics Engineering field, actively helping customers to turn their Ideas into Products. Italy
Via Lobbia 3/B, Mena, 33010
Protaset Limited Services: mixed-signal Hardware design, PCB Layout, Firmware and Embedded Software development, Data and Communication Security consulting, Project Management. United Kingdom
2 Bellevue Road Barnes, SW13 0BJ, London
Nooteboom Elektronica Nooteboom Elektronica specializes in custom and turnkey electronic engineering solutions. Complex electronic difficulties bring us the challenge to solve. Nooteboom Elektronica gained more than 20 years of experience and a vast amount of satisfied customers. Netherlands
Hoevenstraat 1a, 8161, PP Epe
Fuzhou Suntop Elec. co.,Ltd. Suntop is specialized in the development &design of technology products, including consumer electronics, portable digital products, power tools, communication products etc. And technical services of related field. The promoted products and programs have made great achievements in various fields. There is a powerful R&D and service team of microcontroller software, hardware, power control and management in our company, so we can provide consulting to customer and support program mass production. China
2F,13# Building, E District Fuzhou software park, No. 89, Ruanjian main Rd., Fuzhou, Fujian Province
Formilab Pty Ltd Formilab is a hardware accelerator focused on rapid prototyping and short-run production of consumer electronics and IoT devices. Australia
5/10 Gillies Street, Essendon North, 3041, Victoria
VNPT抛光工艺ogy VNPT抛光工艺ogy is an electronic design and manufacture based in Hanoi. Company is pioneer in the research, development and manufacture of electronics, telecomunication and information technology. Our expertise includes circuit design, writing firmware in C/C++ and assembler, design software in Java, .NET, QT, design Android/iOS App communicating with IoT devices. Vietnam
黄平君Quoc越南街124号,标出小季爱雅区,汉族oi Capital City
Audesine.com Audesine.com is a boutique electronic design and prototyping firm based in Bangalore, India. We have experience with analog as well as digital designs. India
No. 473, 19th Main, 35th Cross, Jayanagar 4th 'T' Block, 560 041, Bangalore
Digital Papaya Inc. Digital Papaya (DP) is a technical services exporting startup based in Puerto Rico. Founded by a Silicon Valley veteran that knows speed and quality are key, DP offers a low friction click-buy-go model to quickly start your Silego design jobs, and scale your engineering team. Puerto Rico
Engine4, Complejo Onofre Carballeira Esq. PR-2 con Int. PR-5, Bayamón, 00959
Pensar Development Pensar provides a full-service product design and development team, including Industrial Design + UI/UX, Mechanical Engineering, Electrical Engineering, and Software/Firmware Engineering for projects ranging from initial design concepts and proof-of-concept prototypes through new product introduction for high-volume production at a contract manufacturer. We cover consumer, medical, professional, industrial, and aerospace market segments, with closely integrated design and engineering. Pensar is skilled with proprietary radio, Wi-Fi, and Bluetooth technology, embedded displays, FPGA, low-power battery operation, capacitive touch sensing, advanced optical sensors, complex mechanisms, thermal analysis and computational fluid dynamics. USA
1011 Western Avenue, Suite 1000 Seattle, WA 98104
Indesign, LLC Indesign, LLC is a multi-discipline engineering design firm that provides full turnkey electronic product development to allow clients to get their new product ideas into the market quickly. Indesign offers complete product development capabilities, starting with a product concept and finishing with a ready-to-manufacture design. Indesign has an ISO certified product development process and a proven track record for on-time, on-budget, high quality product realization. Indesign provides specific design engineering services and expertise in electrical design, RF/wireless design, embedded software design, and mechanical design. Indesign also provides engineering services and expertise in a variety of other technical areas including systems engineering, human factors, project management and product validation testing. Indesign engineers can complement a client’s in-house design engineering staff, working in partnership with clients on joint development projects. USA
8225 E 56th Street, Indianapolis, IN 46216
Back to results

2 weeks ago

Simple(I thought) Latch issue

Posted byRenegade_of_Funk10 points 1 reply
0 upvotes

Hello, I need to latch the input of one of my pins on startup and hold that value to be used for a mux control bit. (its flipping a usb c and rerouting a spi bus)

I cant seem to get the latches working right to just hold the initial value and not change when the initial pin used changes states. ie, I want to use a CS line (starts high) to detect a signal location (my other signals are all low)

Is there a clever way to setup the latch so it grabs the initial value then does not change until a power cycle?

I am developing on the SLG46824.

Thank you.

2 weeks ago

ssaravan

Hi,

谢谢你向我们伸出援手。如果您正在使用a latch with initial polarity high ("1") , the nRST input should be connected to the VDD, otherwise the LATCH may fail to work. Also while testing the design, instead of Emulation mode, please program the chip and use the Test Mode.

Please let me know if you have further questions

Kind Regards

Shivani