2 days ago
Sr. Design Engineer
Posted byvijay.moghe@flex.com15 points 2 repliesHi,
I was looking at using the DA9021 PMIC Charger IC for one of our current projects. I noticed that it is mentioned that it is not recommended for new designs. I wanted to know why that is the case?
Do you have any other PMIC Charger ICs with integrated Buck Regulator with the following specifications?
Input Voltage : 5V
Buck Output Voltage: 3.3V
Charge Current : Programmable up to 500 mA
Battery Type : Lithium Polymer/ Lithium Ion
Thanks,
维贾伊
2 days ago
Hi Ellicot,
The charger needs to have at least one integrated buck switching regulator with a 3.3V output.
If there is more than 1 regulator, that is fine. But we cannot use an LDO for our application.
一个电池充电器的需要s to have a programmable charge current of 500 mA or less.
2 days ago
Hello Vijay,
Could you confirm some requirements for me.
I take it, you are looking for a single cell charger, with a programmable charge current of 500mA?
Due to the charge current, a linear charger would be acceptable?
The device also needs to have a 1 x 3V3 buck only?
Kind regards,
Elliott