Need Help in Making UART connection

Hello,

do you want to use these two devices for evaluation or in the final application?
For the PAN1740 is it the USB dongle you have or just the module and you want to place the module into your application?
The design guide is the best way to start with the module:
http://pideu.panasonic.de/files/Documents/WM%20Documents/PAN1740/PAN1740...

Regards,
Ingo

我们将在几周内为DA14580提供串行端口服务，如DA14580。
直到然后请从设计指南中从示例开始。

Which profile do you want to use? They are all ready build and you can find them in the SDK e.g. - DA14580_SDK_3.0.2.1\dk_apps\src\ip\ble\hl\src\profiles
也许StreamData配置文件是您需要的配置文件？
There is no scripting available, you have to use the already build in Keil projects. Scripting is not an option if you want to achive good performance in terms of power consumption.
如所说，请从设计指南开始，让我知道您有任何问题。不要指望一周内有一个正在运行的项目。如果您需要AT命令样式模块，则必须选择另一个选项。DA14580可在许多方面可配置，这意味着您将无法与您在Keil中的项目和示例一起使用。

You may also email towireless@eu.panasonic.com.如果有任何问题

你好Chandra2sekhar2000，我问了其中一个团队来看看你的问题。与此同时，您可能会发现以下线程可从非常相似的问题中了解。

http://support.dialog-semicondiondiondiondum/sdk-program-datastructure.

BR JE_DIALOG.

嗨chandra2sekhar2000，

Fully understand your urgency. Since you are looking for some low data rate app like function, I would like to suggest you refer to our sample128 reference. It's inside our sdk and there is an application note on that which you can download from our website.
In general the sample128 profile have two very simple characters which allow write and a notification character. You can reuse those two writable characters to transmit data. As I remember, Each character only have one writable byte but obviously you can change it. Then you will have a most simple spp in BLE layer. The application note is about our software architecture, you can search this key words to find it. There is very detailed steps tell you which file need to change and how. However, you still need to build two application level files app_sample128.c and app_sample128_task.c. Those files handle BLE profile messages like database build, write indication and notification etc. above application note mentioned how to create these two files. If you feel hard to create these files from scratch, you can also refer to some simple profile application code like App_diss.c and app_diss_task.c.
最后，您需要处理UART。您可以使用DA14580将Prod_Test项目引用到托架和RX下。
Hope this helps you! Good luck and hope you can made!

Regards!
PY

Hi chandra2sekhar2000,

应用笔记UM-B-015_DA14580软件架构将指导您在示例128项目上。
从您描述中，它看起来仍然像SPP透明通信项目，对吧？那么这里将是我的建议：
1. On peripheral side, you put all BLE stack and profile in DA14580 and only leave uart communication to host MCU, just like what we talked before. Dont' use HCI because you may need to separate BLE stack and profile and need to handle all message exchanging between and state machine as well. I'm not saying you can't do this but absolutely will need more time. Then you just need to customize your SPP like profile based on current profile example(sample128 or DISS etc.) and hand UART communication(please refer to prod_test project in our SDK). Even though I think you will spend week time on this, anyway it's the fastest way I can think of. If you really hope to use HCI, you can refer to paper UM-B-017 and RW-BLE-HOST-IS. In prod_test project you can also find reference code(we actually not open HCI interface to end user).
2.在PC方面，很难提供你的建议，因为我不知道你将拥有什么样的加密狗以及它将拥有的固件。如果您无法编制加密狗，您将无法将您的专有配置文件放在里面。所以也许你可以在里面购买DA14580的Dailog BLE加密狗，你可以以同样的方式编程。然后你将有最大的灵活性。Dailog Ble Dongle是我们的入门套件。
Finally, this may not be a very short project as you expected. Hope this help!

Regards!
PY

Hi chandra2sekhar2000,

很高兴知道你在两天内的进步！
你说USB加密狗Pan1740工作正常。而且如果您可以在iPhone中尝试一些应用程序，您可以轻松连接到DA14580接近配置文件，读取和写入值。我认为这些应用程序还将与您自己的项目合作。我过去没有尝试使用DA14580套件的TI CC2540监视器。所以很难说出的问题是什么。也许关于CC2540固件存在一些限制。对不起，我无法帮助您了解该设备。

Regards!
PY

Hi chandra2sekhar2000,

对不起，我下班了，现在是23点。无论如何，让我看看我是否能找到方法可以帮助你。

Regards!
PY

Hi chandra2sekhar2000,

抱歉，无法从对话框中释放app_sample128文件。我们只是指导客户建立应用程序级别文件的方式（我们认为这不难但真的需要一些时间）。每个客户都有自己的方式基于其目标建立应用级别代码。我自己没有撰写app_sample128。在这里，我只能发送由我拥有的其他人组成的自定义app_sample128代码。请注意，此代码只能用于您的参考，因为它们不是对话框版本。
Come back to your application, I believe you still need to understand our software structure if you need to build up customized profile as well as customized low level driver, this is the same for every vendor. If you have specified question related to our SDK, I would be very happy to help you.

Regards!
PY

嗨，大家好，
我只是想评论这个线程。我也trying to develop something similar here. To start, Dialog and Panasonic, you guys are giving some really good help here. From this thread and related documents I've been able to connect most of the dots. The chain loading of profiles after the GAPM in the init process is pretty smart. (I used a similar state machine through system messages in another project I designed years ago). One caveat I'd mention when trying to debug any of the apps created using the PAN1740 module (and procedure for running code, found in the related guide). You can't use the debugger to run the compiled code for the Cortex-M0 because it gets stuck in a while loop that waits for the debugger to be turned off. I was only able to advertise (the proximity example, fully hosted) by using the connection manager utility.
I'm still using the software guide to build up from the template example and pull from the other project code bases the necessary components and profiles to utilize a bi-directional spp. The big problem I foresee after this is the creation of the profiles on the opposite side of the link. Since Bluetooth developers don't seem to have an SPP for BLE, I'm thinking there wont a default profile I can program the dialog to mimic (thus saving me time coding the profiles to run a series of smart phones, ubuntu and windows). I could be wrong here.

Thanks!
- 诞..

您好Nate，我们刚刚发布了我们的串行端口服务自定义配置文件，使用Android APK Wtih一个iOS应用程序稍后在Q4稍后。Q4稍后还将有一个更新，以增加扩展的睡眠支持和硬件流量控制，但它应该是好的 - 今天是为了让你运行。它可以为Android Central角色执行14580至14580或14580或14580。

您可以在此处下载它：注意Android APK位于二进制文件夹中...用户手册探讨所有其余的。

http://support.dialog-semicondiondiondum/ref-designs.

谢谢Je_Dialog.

谢谢你们！你真棒！