您好，我们的支持人员，
I am working on project, where my device uses DA14583 MCU and software is designed such that using BLE command it's turn On/Off the LED's.
But my hardware is powered using Chargerable LiPo battery, whenever battery low i can recharge the battery for this i need to give an indication to user.
To monitor the battery level i need a provison in my software where i could check the battery level using timer.
我引用了电池驱动程序库作为例子，但我只能看到读硬币电池和AAA电池水平的规定。
那么，有没有任何图书馆可与您阅读脂电池水平？如果是，请分享我将使用的图书馆。
if Not, then can you help me how to build a library for LiPo battery?
Thanks in advance
Rohit Rajapure
Device:
Hi Rajapurerohit,
如果您直接使用LiPo连接到DA14583以便通电，请告诉我好吗？如果是，您是如何为DA14583通电的？你用的是哪种脂肪？请注意，DA14583可支持高达3.3V的电压。如果LiPo充满电，电压是否超过3.3V？我想了解你是如何做电力预算，以及你是如何提供电力的DA14583。另外，您使用的是哪种模式的DCDC转换器？降压模式还是升压模式？
谢谢，下午好
你好，下午好，
If you are using the LiPo directly to DA14583 in order to power it up?
*编号：NCP114，3.0伏300毫安CMOS低压差稳压器来自On半导体公司，用于调节电池电压（附数据表）
*Enable pin of the LDO is connected to IN permanently
你用的是哪种脂肪？请注意，DA14583可支持高达3.3V的电压
If the LiPo is fully charged, does the voltage level exceed the 3.3V?
*Off the shelf available batteries are used
How you are doing power budget?
*No specific strategy
How you are supplying power to DA14583
*上述NCP114用于将VCC调节到3.0V
您使用的是哪种模式的DCDC转换器？降压模式还是升压模式？
*NCP114支持工作输入电压范围：1.7 V至5.5 V，输出固定为3.0 V（Buck-Boost？）
使用的电池充电器是MCP73831，微型单电池，完全集成锂离子，锂聚合物充电管理控制器，来自微芯片（附数据表）
Second project:-
And, also my other product using AAA 2 batteries to power up the system. To monitor the battery level I used the inbuilt library Bat_lvl(); and called the function to read AAA. But I always receive the 147% level. So I am not understanding it is in terms of voltage or level? Could you please help me with this also. How do I calibrate in terms of monitor battery levels from 0% to 100%?
Thanks and Regards
Rohit Rajapure
Hi Rajapurerohit,
只是一个更正在我之前的评论，DA14583是只在降压模式下运行。DA145583不像DA14580那样在升压模式下工作。让我检查一下你的输入，我会尽快给你回复。
谢谢，下午好
Hi PM_Dialog,
Is there any update on this ?
It's urgent for me to solve this please help me as early as possible.
Thanks and Regards
Rohit
Hi Rajapurerohit,
Regarding you issue with the LiPo battery, I don’t have any news until now, but I have asked internally if there is anything available. Regarding you second project, are you using 2 AAA batteries in order to power up the device? If you are running the batt_lvl example of the SDK, did you changed the arguments of the battery_get_lvl() to BATT_AAA?
谢谢，下午好
Hi PM_Dialog,
谢谢你的反馈，
Yes, as I already mentioned in the previous post that I am using 2 AAA batteries to power up the device and also using the Battl_lvl() function with AAA to read the level.
所以请让我知道为什么它总是给我147%，或者是在电压方面。如果是百分比的话，那么如何用这个校准0到100%的水平呢？
Thanks and Regards
Rohit
Hi Rajapurerohit,
请尝试在battery\u get\u lvl（）函数中记录adc\u采样值好吗？当2节AAA电池串联时，设备处于降压模式。
谢谢，下午好
Hi PM_Dialog,
I am receiving a value 147 %.
LiPo图书馆有更新吗？
Thanks and Regards
Rohit
你好，
Any update on both project issue?
It is really urgent for me to solve please help.
Thanks and Regards
Rohit
嗨，罗希特，
关于LiPo电池，我在内部进行了检查，没有任何软件来监控电池电量。请记住，不建议在DA1458x产品中使用LiPo电池。要做到这一点，如果你还想使用脂电池，你应该有我们自己的计算。关于连接到系列的2个AAA电池，能否在调试模式下运行SDK的adc示例，添加断点adc\u get\u vbat\u sample（），并让我知道此函数返回什么？雷电竞官网登录
谢谢，下午好
Hi PM_Dialog,
谢谢你的回复，
you have mentioned, " Keep in mind that is not recommend to use LiPo battery with DA1458x products " - May I know why it(LiPo battery) is not recommended. Is there any document that mentioned regarding the same?
Thanks and Regards
Rohit
你好，
我已经在调试模式下检查了设备，
具有以下功能，
1） adc\u get\u vbat\u sample（）
2） 电池获得等级（电池AAA）
附件是样品和电池价值的图片。
我请请求你请分享点你的gently. It's very urgent.
Thanks in advance
Rohit
Hi PM_Dialog,
Very Urgent to solve.,
You have mentioned that Use of LiPo battery with DA1458x product is not recommended.
Can you please tell me why it is not recommended? Does it affect functionality-wise to the controller or any other effects on DA1458x products?
The thing is we have already used the battery and our product is under the production phase, So please share why LiPo is not recommended and it affects on DA1458x.
Thanks in advance
Rohit
Hi Rajapurerohit,
让我把事情说清楚。您可以将LiPo电池与DA1458x产品系列一起使用，但应确保供电电压符合数据表规格。DA1468x/DA1469x产品设计用于使用可充电电池，但由于您使用的电池在电压规格范围内，因此也可以与DA14583一起使用。如果您想获得LiPo电池级别，您应该继续自己的实现，因为SDK的ADC示例不支持它。要做到这一点，LiPo将不会有任何影响，如果你已经注意到芯片的电压规格。2关于DA1雷电竞官网登录4583数据表，蓄电池电源电压（VBAT3V）应在2.35V和3.3V之间，这是推荐的工作条件。如果LiPo始终在限制范围内，那么使用它就没有问题。此外，根据DA14583数据表，VBAT的最大电压限制为3.6伏，因此强烈建议不要为芯片提供超过3.6伏的电压。关于行中连接的2 x AAA的问题，ADC示例支持该条件。那么，在为DA14583供电时，您总是得到这些结果吗？
谢谢，下午好