IW1699B.

IW1699B.

30W / DC离线控制器用于功率适配器,提供较低的输出纹波,更宽的输入电压VS IW1699

一支工程师组织准备回答你的问题

1% output ripple, small solution size

The iW1699B improves on the performance of Dialog’s iW1699 AC/DC controller by reducing the output voltage ripple to 1% on a 12V output voltage, increasing the Vcc input voltage range up to 25V, and increasing robustness with extra protection features.

IW1699B可轻松符合美国DOE的外部电源效率标准和欧盟的行为准则,第5版,第2层外部电源标准,无负载功耗小于30MW,同时遵守最小的主动模式效率要求。

IW1699B还包含对话框SmartDefender™智能打嗝技术帮助在电缆和连接器中介入软短路。了解有关SmartDefender先进的HICCUP技术的更多信息here

The iW1699B is pin-to-pin and backward compatible with theIW1699

一种DiaSIMsimulation model is available for the iW1699B. For more information and where to download, please visit theDiaSIM页。

Features

  • 低输出纹波电压 - 12V或5V输出电压的120mV
  • 25V MAX VCC输入电压范围
  • 轻松符合DOE外部电源和欧盟COC版本5,第2层标准
    • Less than 30mW No-Load Power Consumption
  • 一种ctive Start-Up Reduces Start-Up Time without Increasing No-Load Power Consumption
  • Selectable Voltage Offset Compensation for Voltage Loss in Cables and Connectors (5 Options)
    • Selectable via Single Resistor to Ground
  • PrimAccurateTM- Primary-Side Control, No Optocoupler Needed
  • Intrinsically Low Noise Solution - No Audible Noise Over Entire Operating Range
  • 一种daptive Multi-Mode PWM/PFM Control for Optimal Efficiency Across Load Range

Features

  • EZ-EMI.TM设计轻松满足全球EMI规范
  • Fast Dynamic Load Response (DLR)
  • SmartDefender™Smart HiCcup技术
    • 帮助在电缆中的软短路址,连接器无闭锁
    • 通过在短路期间降低平均功率至少50%,帮助保护电缆和连接器免受过多的热量和损坏
  • Fully Protected from Fault Conditions
    • Over-Voltage/Over-Temperature Protection (latch option)
    • 片上内部过温保护
    • Output Over-Voltage and Over-Current Protection
    • Input Undervoltage Protection
    • Sense-Resistor Short Circuit Protection
    • 批量输入电容放电电路
  • Pin-to-pin and backward compatible with iW1699

雷竞技安卓下载

  • 智能手机,平板电脑的紧凑型电源适配器
  • 一种C/DC adapters for consumer electronics

型号可用!

框图

Typical Applications Diagram
功能框图

Resources

产品简介和摘要
Date
IW1699B产品摘要 06/12/2017 Rev. 1.7

For technical support or information on how to buy, contact us directly.

Request Samples联系我们Register for newsletter

Dialog’sDiaSIMsimulation models and tools enable simulation and validation of AC/DC power supplies using highly accurate models for selected products. All models and application circuits are available for download from the support website.

下载

需要技术帮助吗?

Visit our support web site to:

  • Get help from Dialog experts online.
  • 搜索论坛。
  • 访问软件,驱动程序,工具和实用程序。